Sniffing the CAN-BUS with the SuperSniffer Software v1.xx

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby datachaos » Wed Apr 12, 2017 3:30 pm

Where is the link to download the software and source ? I wanna revive this project
datachaos
 
Posts: 1
Joined: Wed Apr 12, 2017 3:28 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby xmenmaxx » Thu Apr 13, 2017 10:43 am

Hi Martin !
Please, Can you provide the source code for SuperSniffer Software v1.08 ? SuperSniffer Software v1.07 after a few seconds of operation generates an error, instead SuperSniffer Software v1.08 works impeccably without any error.
xmenmaxx
 
Posts: 1
Joined: Mon Mar 27, 2017 3:51 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby dubb45 » Wed Apr 26, 2017 6:12 am

I'm able to get the software working with Arduino r3 and can bus shield from linksprite. only wish there was an option to export the data.
dubb45
 
Posts: 1
Joined: Sat Apr 08, 2017 7:49 am

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby ozouzdxj » Thu Jun 15, 2017 2:25 pm

Thank you!
ozouzdxj
 
Posts: 1
Joined: Thu Jun 15, 2017 1:29 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby MP3GMike » Tue Aug 15, 2017 6:19 pm

Hi,

The youtube video is not available, do you have a new link?

Regards,
Miguel
MP3GMike
 
Posts: 2
Joined: Tue Jun 06, 2017 7:47 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby MP3GMike » Wed Aug 16, 2017 3:55 am

Hi,

The projects uses the direct connecction to the radio... Can I use de ODB2 - DB9 cable?

It will work?

Regards,
Mike
MP3GMike
 
Posts: 2
Joined: Tue Jun 06, 2017 7:47 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby TymciaK » Mon Aug 28, 2017 8:26 am

I have problem with this page. I cant login to download Can Sniffer. When I come to this page Im automatically logged off.
TymciaK
 
Posts: 2
Joined: Thu Aug 24, 2017 5:06 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby Splatten » Sat Oct 14, 2017 5:51 pm

Hi, I've just copied the source from the first post and pasted into a new Arduino sketch, I have downloaded the CAN-BUS library and compiled.

I am using Arduino version 1.8.4, when I attempt to compile the sketch I get:

canSniifer:6: error: 'INT32U' does not name a type
INT32U canId = 0x000;
^
/Users/Simon/Documents/Arduino/canSniifer/canSniifer.ino: In function 'void setup()':
canSniifer:19: error: 'CAN' was not declared in this scope
if(CAN_OK == CAN.begin(CAN_125KBPS))
^
/Users/Simon/Documents/Arduino/canSniifer/canSniifer.ino: In function 'void loop()':
canSniifer:35: error: 'CAN' was not declared in this scope
if(CAN_MSGAVAIL == CAN.checkReceive())
^
canSniifer:38: error: 'canId' was not declared in this scope
canId = CAN.getCanId();
^
exit status 1
'INT32U' does not name a type


Can anyone help? Thank you,
Splatten
 
Posts: 1
Joined: Sat Oct 14, 2017 5:47 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby doubas » Thu Oct 19, 2017 8:38 pm

Thank you all for these valuable informations even though the posts are ages old..
doubas
 
Posts: 1
Joined: Thu Oct 19, 2017 8:28 pm

Re: Sniffing the CAN-BUS with the SuperSniffer Software v1.x

Postby agilfm » Fri Oct 20, 2017 6:39 am

thank you
agilfm
 
Posts: 1
Joined: Thu Oct 19, 2017 5:44 pm

PreviousNext

Return to OBD2 & CAN-BUS Projects

Who is online

Users browsing this forum: No registered users and 1 guest